Part Number: 533
Manufacture: Amesbury Truth
Known to have been used on: For Hurd Sliding Patio Doors Manufactured Prior to 9/18/2006 and peachtree and any more that used Amesbury Truth Parts
Old Style Stamped on part: 2153
Works as a replacement option for W&F keeper that has been discontinued
Part Number: S4115
Peachtree W&F Peachtree Citadel Swing Patio Door Multipoint Lock Aux Module
This is designed to be field reversible. The latch is two
stage, it operates first as a latch, then further extends to
be a deadbolt. But the housing is symmetrical and the latch
is removable. It can be operated for Left hand or Right Hand, inswing or outswing swing doors.
Associated Parts Sold Separately:
D301 W&F Trilennium multipoint 6 Inch CTC Replacement Handle Set
S4112 - Peachtree Multipoint Mortise Lock Citadel IPD Citation W&F
Part Number: S1097
Peachtree Ariel Top Casement Hinge Assembly
Style: Left Hand or Right Hand (see picture to determine handing)
Size: Standard or Egress (see drawings with dimensions to determine your size)
Associated Accessories Sold Separately:
Part Number: S1096: Bottom Casement Hinge Assembly
Part Number: S1098 Peachtree Ariel Casement Window Sash Hinge Pivot Screw and Washer
Part # 210 - Amesbury Truth 11 Series (11.14) Awning OperatorWhite and Bronze are special order items. No returns. 3-4 week lead time.
Known Part Numbers: 210 U.S. PAT. 4505601, PAT, CAN. 1986, 45301 Known Brands: For larger Hurd awning windows built prior to 1988., Weather Sheild, BiltBest, Truth, Amsbury Truth, 11 Series (11.14), 11-14-32-001
Steps in the below video are very similar when you are replacing part number 210 awning operators.
Part Number: S3023
Patio Door Roller Assembly 1 1/4 inch Steel Wheel PDR 40 (C)
Featuring a 1 1/4 inch Steel Wheel PDR 40 (C), the S3023 Patio Door Roller Assembly offers a reliable and steadfast solution.
Material (housing): Stamped Steel or Stainless Steel
Wheel Size: 1-1/4 Inch
Wheel material: Steel
Number of wheels: 1
Sold Individually
Known to have been used on Peachtree Citation
Top panel guide rollers are recommended when replacing bottom panel rollers Part Number S3024
Part number: S1095
Color: Bronze
Length: 70 inches lengths (shipped straight can not roll)
Overall Dimensions: 3/8 Inch x 1/2 Inch
70 inches = 1 pc
Peachtree ariel casement and awning sash weather stripping
Leaf weather stripping
Part Number: S4111 Discontinued No longer Available . Replace with Part Number 852 Handle Set
Prado Contemporary Patio Door hardware
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
Peachtree Prado Door Handle Hardware Trim PTP Trim (W&F Hardware)
6 inch center to center (thumbturn and key cylinder)
Thumb-turn inside
Color: Antique Brass finish
Comes with: Interior and exterior faceplate and knobs, shaft, strike plates, keyed cylinder and 2 keys.
As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available
Known Part Numbers: 36280005 8006-3, PTP Trim, S4111
Part Number: S6008
Screen Door Roller PSR86
SOLD Individually
Brand: PeachTree
Wheel: Steel 1 Inch
*Note to customer* there are a wide variety of rollers available. If the drawing does not look exactly like your tandem roller Click Here to see all rollers on our website. If you cant find the part you are looking for please email or text us a picture of your roller and our research team would be happy to assist you with finding the right one. Email: Info@WindowPartsCetner.com Text Line: 303-222-4489
Center Roto Hook For Awning Window
This is the part that goes on the sash that the operator hooks on to. For Awning Windows.
Dimension - 3 1/16 Inch Longest point to Longest point
This part is used with our part # 211 operator.
Color: Limited supply of Black color old color. Once stock is depleted, only Beige E-guard will be available.l and shipped out.
Part Number: S4013
Hoppe Millennium Adjustable Hinge - 2-D Set Hinge with Non-removable Pin Vertical Adjustment - Hinges are Non Handed. Works for both Left hand and Right hand swinging doors. Known to been used on WeatherSheild and Peachtree Doors
Colors Still Available: Stainless Steel
Discontinued Colors: Oil Rubbed Bronze, Brass Chrome, antique brass
Pat.Nr. 5.701.1636, 122210600
Set and Guide Hinge Placement Table:
3 Hinges Per Door Panel - Up to 165 lbs:
Starting at top of door Top of door
Guide - Part Number S4014
Set - See Part Number S4013
Guide - Part Number S4014
4 Hinges Per Door Panel -Up to 165 lbs:
Anytime you need 4 hinges you would just add another guide hinge
Starting at top of door Top of door
Guide - Part Number S4014
Guide - Part Number S4014
Set - See Part Number S4013
Guide - Part Number S4014
4 Hinges Per Door Panel - 165 - 330 lbs:
Starting at top of door Top of door
Guide - Part Number S4014
Set - See Part Number S4013
Set - See Part Number S4013
Guide - Part Number S4014
5 Hinges Per Door Panel - 165 to 330 lbs:
Guide - Part Number S4014
Guide - Part Number S4014
Set - See Part Number S4013
Set - See Part Number S4013
Guide - Part Number S4014
Pro Tip: Remove weight from the hinges by lifting up on the door before you adjust.
Known part # 850-2388803, 850-8754819, 122210600
General HOPPE Adjustable Hinge Adjustment Instructions:
Determine hinge locations on the frame and door panel. Recommended hinge positions are given in the Set and Guide Hinge Placement Table above.
Prepare the door panel and frame.
Fasten hinges into the door panel. #10 ANSI wood screws with a minimum length of 1 1/4” are recommended. The Set Hinge must be installed according to the installation label. The label on the frame leaf will point down to the sill when properly installed.
On the frame, use #10 ANSI wood screws that are 5/8” to 3/4” long in three of the four screw locations. One screw on each hinge should be at least 1 1/2” long to reach the stud. This screw is typically left out and is installed after the door is positioned in the rough opening.
Install the frame leaf of the Set Hinge into the routing on the frame and fasten securely. Do not allow the Set Hinge(s) to support the weight of the panel without installing the Guide Hinges.
Install the frame leaf of the Guide Hinges into the routings on the frame and fasten securely. Leaves on the Guide Hinges will slide freely up and down for alignment with the rout.
Do not adjust hinges prior to the final installation into the rough opening. This will affect the ability of the door installer and end user to utilize the full adjustment range of the HOPPE Adjustable Hinge.
Disassembly
Do not attempt to remove the hinge pin, as this may cause damage.
To disassemble the door panel from the frame, support the weight of the panel to relieve the weight from the hinges.
Carefully remove either the frame leaf screws or door leaf screws to displace the panel.
Adjustment InstructionsIntroductionThere are two types of HOPPE Adjustable Hinges on each door panel:
Set Hinge: One or two per panel. The Set Hinge provides ± 1/8” vertical adjustment.
Guide Hinge: Two or three per panel. The Guide Hinges provide ± 1/8” horizontal adjustment. Look for the visible adjusting screw on the door sash leaf. This identifies the hinge as a Guide Hinge.
Hinge designs may vary, but adjustment remains the same.
Required Tools
A 3/16” hex wrench is required.
A small flat head screwdriver is required.
A plastic putty knife is recommended.
Vertical Adjustment for Doors with One Set HingeWith the door closed or open:
Remove the press-fit Finial Cap from the bottom of the Set Hinge to expose the adjustment screw. Use the small screwdriver for Set Hinges featuring a plastic Finial Cap. A plastic putty knife is recommended for Set Hinges featuring a brass Finial Cap.
Insert the hex wrench into the bottom of the Set Hinge. Tighten the screw to raise the panel and loosen to lower the panel.
Reinstall the Finial Cap removed in Step 1.
Vertical Adjustment for Doors with Two Set HingesWith the door closed or open:
Remove the press-fit Finial Cap from the bottom of the Set Hingeto expose the adjustment screw. Use the small screwdriver forSet Hinges featuring a plastic Finial Cap. A plastic putty knife isrecommended for Set Hinges featuring a brass Finial Cap.
To raise the panel, insert the hex wrench into the top-most SetHinge and tighten the adjustment screw to achieve the desiredInsert the hex wrench into the other Set Hinge andtighten the adjustment screw 1/8 turn past the onset of resistanceto distribute the panel weight evenly between both Set Hinges.
To lower the panel, insert the hex wrench into the top-most SetHinge and loosen the adjustment screw as far as possible withoutInsert the hex wrench into the other Set Hinge andloosen the adjustment screw to achieve the desired adjustment.Retighten the adjustment screw on the top-most 1/8 turn past theonset of resistance to distribute the panel weight evenly betweenboth Set Hinges.
Reinstall the Finial Caps removed in Step 1.
Horizontal AdjustmentWith the door open:
Insert a 3/16” hex wrench into the horizontal adjustment screw.
Turn clockwise to decrease the margin and counterclockwise toincrease the margin on the hinge side.
IF THIS HINGE DOES NOT LOOK EXACTLY LIKE YOUR ADJUSTABLE HINGE. CLICK HERE TO SEE ALL THE ADJUSTABLE HINGES WE HAVE ON OUR WEBSITE TO ORDER. IF YOU ARE NOT FINDING YOUR HINGE PLEASE EMAIL OR TEXT OUR RESEARCH DEPARTMENT AND WE WOULD BE HAPPY TO ASSIST YOU
Part Number: S1098
Peachtree Ariel Casement Window Sash Hinge Pivot Screw and Washer
Fits Upper and lower sash hinge link arm (sold separately)
What's Included: Each kit comes with 2 screws and 2 washer
Screw is Stainless Steel
Washer Is Aluminum
Associated parts Sold separately :
Part Number: S1096: Bottom Casement Hinge Assembly
Part Number: S1097: Top Casement Hinge Assembly
