Sliding Patio Door Handle Set & Parts

Part Number: C1033 Surface Mount Mortise Lock 45 Degree latch with face plate Deadlatch Assembly   Material: Standard Cylinder: 45 Degree Faceplate mounting screw holes: 4 5/8 inch center to center Overall Depth: 1-9/32 inch  Have known to been used on: Cascade, Sierra Pacific, SuperSeal, Jeld Wen vinyl sliding sliding patio doors, Amsbury Truth Hardware, 2998 Series, SuperSeal, Sierra Pacific Vinyl and Hurd Vinyl and more. VINYL 8000/8500 SERIES SLIDING PATIO DOOR (V-SPD) and more

Read more less

Part Number: 558 Amesbury Truth - Gemini II PD Dual Action Mortise  Lock With Recessed Trim Plate  2818 Series - 2 Point - For Sliding Patio Door Keeper Sold Separately  Finish:  Standard (Stock) Stainless Steel (Special order non stock no returns) Stamped on mortise lock: PAT# 6.284.252 and PAT # 5.820.170 Used On: Hurd Sliding Patio Door and Sierra pacific WI sliding patio door and other door brands. The Gemini II 2-point mortise locks has set the standard for 2-point locking in the sliding door industry. Gemini II locks are compatible with all industry standard handle sets and features opposing hooks that can be adjusted individually for proper keeper engagement. We offer a variety of keepers that are compatible with the Gemini II 2-point lock system to accommodate any application. There is also a “keeper locator” available to help ensure proper operation of the lock and keeper. The Gemini II lock has been built to help customers meet industry standard forced entry requirements with the ability to withstand 1,500 pounds of force. The lock also features an anti-slam pin that prevents damage to the door or locking system hooks by not allowing the hooks to extend unless the door is closed against the frame. Product Highlights: Recommended for:  aluminum, composite, vinyl, and wood Lock can withstand up to 1,500 lbs. of forced entry Hooks oppose one another to prevent panel lift Individual adjustment of hooks Anti-slam button to prevent false lockup Faceplate options to fit any application Steel and stainless-steel material options Keepers available in various heights and material choices Lock actuator is centered for 3-hole machining or offset by ¾ inches for 4-hole machining Keeper Locator available to ensure good alignment between the lock and keeper in the application Same Style Mortise Box with Different Face Plate Part Number: C1035 Amesbury Truth Gemini II  PD Dual Action Mortise Lock

Read more less

Part Number: 533 Manufacture: Amesbury Truth Known to have been used on:  For Hurd Sliding Patio Doors Manufactured Prior to 9/18/2006 and peachtree and any more that used Amesbury Truth Parts Old Style Stamped on part: 2153 Works as a replacement option for W&F keeper that has been discontinued   

Read more less

Part Number S4102 Hoppe 90 Degree Profile Full Cylinder with Crescent Knob For 1 3/4 Inch to 2 1/2 Inch Thick Door Panel Can be converted from 90 degree to 360 degree - see pictures for instructions and videos below. Cylinder Sizing: Verify Door Thickness and Cylinder size by using chart "Inside Distance A" and "Outside Distance B" according to door thickness, Euro groove location and the style of back plate used.  Sizing:   For Doors: 1 3/4 Inch to 2 1/2 Inch Thick Door Panel See chart  For Doors: 2 1/8 inch to 3 inch Doors - see chart  Related Parts Sold Separately: Part Number S4103 - Hoppe Short Cylinder Insert Part Number S4105 - 2mm or 5/64" Hex Wrench Part Number S4107 - Set Screw For 2 1/8 inch to 3 Inch Thick door panel Full Cylinder  see part number  Trouble shooting:  If you cannot get the cylinder to line up and go in you need to lower the pin beneath the thumb turn. That frees the cylinder to move and line up for install. Then once put in and turned the cylinder will operate. It is a newer safety feature on these cylinders. Please watch video below.  

Read more less

524-005 Adams Rite / Assa Abloy Sliding Patio Door Handle Metal Latch Plate  Manufacturer: Adams Rite / Assa Abloy   Over All: 3 15/16" Long x 53/64" Wide Middle Rectangle Offset cut out: 1" long Top of strike to top of offset middle rectangle  cut out: 1 -11/16" Discontinued Product. What we have in stock is all that is available. Sold as is no returns all sales final.     

Read more less

As is - New Condition old stock (may have minor scuffs, etc.) - No returns all sales final. Once our stock is gone this item will no longer be available replacement is  Only available as a kit now see part # 555 Part number 501-002 Double-Hook Mortise Lock Keeper (Truth Hardware) Comes with 1 Mounting plate keeper as shown in picture  501-002 is a Discontinued Old Style No longer Manufactured once our stock is gone it will  Only available at a kit now see part # 555 Related Product: Replacement Handle Set: Part # 544 AmesburyTruth Signature Style Handle Set Two Point Locking For Sliding Patio Door Mortise Box and Keeper: Used with Part # 555 - AmesburyTruth 2 Point Recessed Mortise Lock & Keeper Kit 501-002 Sliding patio door Keeper- AmesburyTruth- Hurd Sliding Door Comes with 1 Mounting plate keeper Discontinued Product. What we have in stock is all that is available. No returns all sales final.  Known part number: 4-5034

Read more less

Part Number S3027 Amesbury Truth House Brand Single Point Sliding Patio Door Keeper 2315 Material: Stainless Steel Known Part Number: 2315-00 and 2315-84 Known Brands Used On: Jeld Wen and more

Read more less

Part Number: S4202 Amesbury Truth Allure Series Gliding Door handle Set Only  (mortise lock box sold separately) Factory has in stock allow 1 week for you order to ship Style: Active with NO Key Color: White MOUNTING SCREWS: 2X #8-32 PHILLIPS OVAL HEAD MACHINE SCREWS (1.75, 2.125, AND 2.50 LENGTH SCREWS ARE PROVIDED IN THE KIT TO FIT STILE THICKNESSES RANGING FROM 1.25 TO 2.25). Known to have been used on Comfort Line FiberFrame and many other sliding patio doors, Part Number 40.85.32.100.1 Below are style of this handle set that is special order and will need to be quoted - please email us for quote info@windowpartscetner.com: Active with Key Dummy Other Colors and Finishes 

Read more less

Part Number S4106 CES Plastic Insert For Cylinder with Crescent Knob Special order item no returns. Please expect a lead time of 1-4 weeks.  Related Parts Sold Separately: Part Number S4104 - Ring Wrench Removal Tool Part Number S4105 - 2 MM Wrench

Read more less